PremiSys
Videos
Resident Manager Videos
Resident Manager - Navigate the Schlage ENGAGE mobile app to manage users and devices
Resident Manager - Use the Schlage ENGAGE app to add a lock to the site
Resident Manager - Use the Schlage ENGAGE app to add an enrollment reader to the site
Resident Manager - Create the property in Resident Manager
Resident Manager - Add a door in Resident Manager
Resident Manager - Set up Resident Manager schedules to limit door access by time
Resident Manager - Set up Resident Manager door groups for access to common areas
Resident Manager - Add a resident and issue a credential for door access
Resident Manager - Replace a resident's lost credential
Resident Manager - Unlock a door momentarily
Resident Manager - Update a door with lock changes
Resident Manager - Audit lock event history
Resident Manager - Manage residents and credentials in PremiSys
Resident Manager Activate lock licenses and generate the Schlage® ENGAGE™ site in PremiSys
Rack Armor Videos
PremiSys Videos
Setting up a Keypad Reader in PremiSys to use Card & PIN Video
Minimum Settings for Access Granted
Configuring LDAP for PremiSys Logins
PremiSys Operator Training Videos
PremiSys Mobile App- Setup and Usage Videos
Activating Add-on Licenses for Exit Devices
How to add IP Gateways and Link Exit Devices Video
How to run Cardholder reports in PremiSys Video
How to Bulk Erase a PremiSys Controller video
Full Installation of PremiSys Video
Create holidays and time schedules for Engage WiFi Locks Video
Hardware
Mercury Hardware
Mercury Reader & I/O Boards
MR50 S3 - One Reader Board
MR50 - One Reader Board
MR51e - PoE One Door Reader Board
MR16IN Series 3 - 16 Input Board
MR52 S3 - Two Reader Board
MR16OUT - 16 Output Board
MUX8 - Eight Channel MUX Board
MR52 - Two Reader Board
MR16IN - 16 Input Board
MR16OUT Series 3 - 16 Output Board
MR62e Series 3 PoE One-Door Reader Board
Mercury Controllers
EP2500 - IP Controller
LP2500 Series 3 IP Controller
EP1501 -POE 1 Reader Controller
LP1501 Series 3 - POE 1 Reader Controller
EP1502 - Two Reader Controller
LP1502 Series 3 - Two Reader Controller
FAQs
How often should the lithium batteries be replaced in Mercury Panels?
What is the cost of panel repairs
Software House Bridge
Upgrading LP Controller Firmware through the Configuration Manager
Software House Bridge with PremiSys quick reference.
MS-R8S Processor Installation and Specifications
MS-I8S Processor Installation and Specifications
MS-ACS Processor Installation and Specifications
MS-ICS Intelligent Controller Installation and Specifications
Mercury Technical Bulletins
How to Upgrade Mercury Firmware for a Controller or an I/O Board
Mercury Hardening Guide
Allegion Hardware
PIM 400-485
Schlage Gateway
Gateway ENGAGE™ Datasheet
How to FDR a Schlage Gateway
Gateway Installation Instructions and User Guide
NDE Series Locks
LE Series Locks
RU / RM Device
RU / RM Data Sheet
How to Install the Von Duprin RU and RM Kits
RU/RM Installation Guide
How to FDR RU/RM Exit Device
CTE ENGAGE Single Door Controller
CTE Single Door Controller Cut Sheet
How to Install and Setup the Schlage CTE Controller Video
How to Install and Setup the Schlage CTE Controller Video
CTE Data Sheet
CTE Single Door Controller Installation Guide
Schlage AD 400 /401
Schlage Control - Deadbolt
How to FDR Schlage Control Lock
Schlage Control Smart Deadbolt Install Guide
Control Smart Lock Schlage (Deadbolt) User Guide
Schlage AD 300 /302
Rack Armor
Idemia- Morpho
Morpho Manager first time Install and Configuration to work with PremiSys
Configure Morpho Manager for Fingerprint only
Setting up the Universal BioBridge to work with PremiSys.
Setting up Auto Login with Morpho Advanced Client Configuration
Installing Morpho Manager Client Software for use with PremiSys
Installing the Morpho Manager Server Software for use with PremiSys
Licensing Identity One (Morpho Manager) in PremiSys
Morpho Manager Quick Install Guide
Idemia Morpho Manager User Manual
Idemia - Morpho Resources
General PremiSys Hardware
ASSA ABLOY
Errors
Database Connection Issue!! Warning Issue
Mobile App Changes Not Downloading To PremiSys Controllers
Add elevator is greyed out in PremiSys while trying to add elevator.
The Application is already running
AddIn Architecture Failed to Start - Services unavailable
Fundamental Application Service Creation Failed; hexadecimal value 0x00 is an invalid character line, Position 1.
General Articles
Not Enough Licenses Remaining when logging into PremiSys
PDC® IDENTICARD 15 - MONTH LIMITED WARRANTY
Offline Controller Troubleshooting Guide
Can’t open cardholder record by double clicking in PremiSys
PREMISYS® ACCESS CONTROL SOFTWARE LICENSE
OSDP Requirements for PremiSys
PremiSys Video Plugin Downloads
Access Control Card Testing
Understanding Data Types
No power at reader
Wiring Specifications PremiSys Hardware
PIMs go online and offline when other PIMs are connected.
Firmware upgrade failed to Initiate
PremiSys Definitions of Security Roles for User Groups
How can I get Support for IDentipass?
Planning Access Groups in PremiSys
PremiSys Features / Comparison Chart
Comparison Gateway RSI-485 vs. Gateway IP vs. Offline Doors
PremiSys Door Connectivity Options
OEM License Information - Non Compliant PremiSys Hardware
Activating PremiSys Mobile License
PremiSys readme file
What ports are used by PremiSys?
PremiSys Access Control Hardware Manual
ENGAGE Site Generation for PremiSys
Understanding Hardware Status and Device Icons
Activating/ Licensing PremiSys Software
PremiSys System PC Specifications
Photo Recall Border Explanations
PremiSys How to Guides
How to Setup and Configure the Additional Relay Option.
How to setup Check-In Reader in PremiSys
How to Add Time Zones in PremiSys
How to add Access Groups in PremiSys
Update Engage IP Gateway Firmware and Locks through PremiSys.
How to setup and configure OSDP readers in PremiSys.
PremiSys Client Quiet Installation
How to wire a PIM to IP controller (EP2500) or POE One Door Controller (EP1501)
Changing the photo path in PremiSys
Backup PremiSys 4.2 and Up with a Custom Password
Importing Data into Premisys
Setting up a PM half day vacation
How to view the Dashboard in a Web Browser
How To Create Alarm Acknowledgement Triggers
Connecting a Webcam in PremiSys
Accessing PremiSys Mobile Outside of the Local Network.
How to Setup One Free Antipassback in PremiSys
PremiSys Holiday Setup Video & Half-Day Holiday Setup
PremiSys Mobile App - Setup and Usage
How to Block Add Cards in PremiSys
How to Setup RSI Gateway
How to Setup Wireless NDE/LE Lock
How to setup a printer in PremiSys
How to Install a PremiSys Client
How to Setup a Scheduled Backup
Setting up Card Formats PremiSys - Allegion Locks
Moving PremiSys Databases onto a new SQL server
Upgrading PremiSys Software
Installing PremiSys to an Existing SQL Server
How to Install PremiSys as Standalone
How to Convert Series 9000 for use with PremiSys
How to use the PremiSys Backup/Restore Utility
How to bulk erase a Mercury controller
How to setup Mustering and Reporting PremiSys
Configure PremiSys ™ Lockout and Lockdown Feature
How to setup IP Gateway
How to run reports in PremiSys
Triggers and Procedures
Pulse a Secondary Relay for a Door Opener.
De-energizing a Control Point with Time Zone
Energizing a Control Point Using a Time Zone
Energizing a Control Point When a Specific Card is Presented
Unmasking a Monitor Point When Time Zone Ends
How to Setup Double Card Tap to Unlock and Lock a Door.
Masking a Monitor Point When Time Zone Starts
Access Control Firmware Download page
Printers
Epson® Printers
Epson SureColor P400
Epson Workforce 2630
Epson Workforce 5210
How to turn off error notifications on Workforce C5210
Epson Workforce - C5210 Driver Recommendations
Epson SC-P700 Series
Error: 'Print processor does not exist' when installing Epson Driver
Epson Printer Head Cleaning and Maintenance
IDP® Smart Printers
IDP Smart 30 Printer
IDP Smart 70 Printer
IDP Smart 51 Printer
IDP Smart 51 Encoding Setup in PremiSys ID or PremiSys
IDP Smart 51 Card Printer Support - How To Videos
IDP Smart 50 Printer
How to get the card count of my IDP Smart 50 Printer?
IDP Smart 50 Card Printer Support - How To Videos
Videos
Magicard® Printers
Zebra® Printers
ZC Series Printers
ZC350 Card Printer Support- How to Videos
ZC300 Card Printer Support- How to Videos
ZC100 Card Printer Support- How to Videos
ZXP Series Printers
HID® Fargo® Printers
PremiSys ID
Errors
Error - Fundamental application services creation failed.
Error Getting Page Size Count Error When Trying To Print
Fundamental Application Service Creation Failed; hexadecimal value 0x00 is an invalid character line, Position 1.
AddIn Architecture Failed to Start - Services unavailable
Videos
General Articles
Printer is Printing Two Cards When it Should Print One.
PremiSys ID & Pro Features / Comparison Chart
Activating PremiSys ID Mobile License
Activating / Licensing PremiSys ID Software
PremiSys ID PC System Specifications
Getting Started with PremiSys ID
How to Guides
Changing the photo path in PremiSys
Connecting a Webcam in PremiSys ID
Printing a Directory with the FaceBook feature.
Moving PremiSys ID Databases onto a new SQL server
How to use the PremiSys ID Backup/Restore Utility
How to Upgrade PremiSys ID software
Custom PremiSys Install - Long Password Policy
Installing PremiSys to an Existing SQL Server
How to Install PremiSys ID as Standalone
How to Add a User in PremiSys ID
How to Replace Image or Logo on Card Design
How to edit the Drop Down Box on the Screen.
How to Delete a Cardholder in PremiSys
How to setup a printer in PremiSys ID
PremiSys ID Training Videos
FAQs
PremiSys Admin Password Reset
What is the PremiSys ID mobile app?
Does IDenticard Repair Printers?
What is the current version of PremiSys ID?
How do I purchase PremiSys ID web training?
How can I purchase a one-time incident for technical support?
How do I purchase a card design?
How do I purchase a PremiSys ID support agreement?
Visitor Management
Whos On Location
Easy Lobby
TEMPbadge
Tempbadge Printer - Labels are Printing Blank
Microsoft Access Security Notice A potential security concern has been identified - TEMPbadge
Error 3073 Operation must use an updateable query
Error Code 2501 “The Open Report action was canceled”
The installation of this package failed Microsoft Access 2010 Runtime during TEMPbadge install
TEMPbadge BP4 Printer Driver - Quick Start Guide
Error 6 During License Activation - Activation Failed
Download TempBadge 6.1 Software
TEMPbadge User Manual
TempBadge Error 42
PassagePoint
PDC® Thermal Printers
PDC® Certis Desktop Thermal Printers
PDC® Portico Mobile Thermal Printers
PDC® Thermal Printer Utilities
3rd Party ID Software
All Categories > PremiSys > Hardware > Mercury Hardware > Mercury Hardening Guide
Mercury Hardening Guide Oct 2018
This Hardening Guide covers how to maximize security with Mercury Controllers. This guide will identify critical information on features, suggest options that should be enabled, and include best practices for using the controller.
Click here to download the Mercury Hardening Guide.
